Suncoast Liner

Cured In Place Pipe Specifications

Perma-Liner Sectional Point Repair System

• No digging
• Multiple installations
• Meets ASTM F-1216 specifications

The sectional point repair are manufactured and delivered in a complete kit form. Each kit is sized to suit the diameter, length, and external loads. This process involves attaching the sectional point repair to a specialized bladder, then positioning the bladder over the damaged area inside the host pipe.

The bladder is then inflated and held in place until the thermo-setting resin is cured. Access points are required through upstream and downstream manholes. Prior to installation of the sectional point repair, the host pipe is cleaned and free of any foreign objects. This will allow adhesion to the host pipe material with the Perma-Liner Sectional Point Repair.

The Perma-Liner Sectional Point Repair is considered a structural repair per ASTMF-1216. The ASTM Specification testing requirements are based on a minimum life expectancy of 50 years.

The Perma-Liner Sectional Repairs can be installed in pipe diameters from 6 inches (152.4 mm) to 54 inches (1371.6 mm) diameter and lengths from 2 feet (0.6096 m) up to 30 feet (9.1440 m) in length. If a sectional point repair is positioned over a lateral junction, the junction can be re-opened with a specialized robotic cutter after the pipe is lined.

Perma-Liner Industries, Inc. has developed a Sectional Lining Point Repair Process that involves a short liner being installed inside the pipe to cover the damaged or missing pipe section.

• 100% solids epoxy
• Fiberglass reinforced materials with a PU coated finish
• As many as 7 repairs in a single day
• Exceeds ASTM F-1216 specifications
• Manufactured in kit form, no measuring or waste
• Used by contractors and municipalities worldwide

Sectional Point Repair Technology

Perma-Liner Point Repair affords the contractor and customer several advantages over conventional pipe replacement and manhole-to-manhole pipe relining techniques. The contractor can make several structural repairs in the time normally taken to do one dig and replace repair. The repair is completed quickly, does not disrupt surface activities and is cost effective.

It is no longer necessary to reline a pipe from manhole-to-manhole in order to address one section of pipe. Now we can simply reline the area in need of repair. The Perma-Liner Point Repair System consists of a fiberglass reinforced Liner and Ambient Cured Resins. The Point Repair Kits are sold from 6″ to 54″ in diameter and 2′ to 30′ in length.

The Point Repair forms a structural, permanent waster-proof repair which seals all types of pipe against infiltration and ex-filtration. The finished repair is stronger than the original pipe. This repair has a superior bond to the existing pipe equally in wet or dry conditions and because the resin is 100% solids, there is no shrinkage and therefore no annular space between the pipe and repair that could cause leakage. The repair system can be used equally well in warm or cold climates.

Leading the Industry Through the 21st Century

Perma-Liner Industries, Inc. provides state-of-the-art, Cured-In-Place-Pip (CIPP) certified materials for trenchless rehabilitation of sewer pipelines and manholes through a network of exclusive Installers.

The science of Cured-In-Place-Pipe (CIPP) rehabilitation has proven to be cost-effective in thousands of installations and millions of feet of pipe all over the world.

The strength, life expectancy, chemical resistance and non-disruptive installation characteristics of CIPP have revolutionized the pipe rehabilitation industry. After 25 years in the market, it remains the preferred method for trenchless repair of municipal sanitary and storm sewer lines as well as industrial sewer and product lines.

The Perma-Liner Sectional Point Repair System is covered under Patent #5,049,003.

Our territory includes: Mississippi, Louisiana, Arkansas, Georgia, East Texas, West Tennessee, Alabama and Florida Panhandle.

Contact us for more info.